How Much Does a Handyman Charge to Replace a Faucet?

Quick Answer: A handyman typically charges $75 to $175 for labor to replace a standard faucet. Kitchen faucets cost more, usually $100 to $200 in labor. If corroded shut-off valves need replacing, expect to add $50 to $100 on top of that.

What the Average Handyman Charges for Faucet Replacement in 2026

The average handyman rate sits at $85 per hour across the U.S. right now. Most faucet swaps take one to two hours. That puts basic labor between $75 and $175 for a straightforward job. This does not include the faucet itself. You supply the fixture, the handyman handles the install.

A simple bathroom faucet usually lands on the low end. Most pros wrap up a bathroom sink job in about an hour, so you are often looking at $75 to $125 in labor. More complicated setups push the number higher. Confirm the estimate before anyone touches a wrench.

Kitchen Faucet vs. Bathroom Faucet: Why the Price Differs

Kitchen faucets almost always cost more to install. Pull-down heads and sprayer attachments add connection points, and more connections mean more time. Labor for a kitchen faucet typically runs $100 to $200. The cramped cabinet space under a kitchen sink slows things down too, sometimes significantly.

Bathroom faucet jobs are generally quicker. Fewer connections, less hardware. Most bathroom installs finish in 45 to 75 minutes, which keeps labor in that $75 to $125 range. A double-handle faucet may take a little longer than a single-handle model, but not dramatically so.

Extra Costs That Can Raise Your Total Bill

The faucet swap itself is rarely the whole job. Corroded shut-off valves are the most common surprise. If yours are old, brittle, or stuck, they need to go, and that adds $50 to $100 to your total. Replacing them now beats dealing with a slow leak inside your cabinet six months from now.

Old supply lines are another item worth checking. They connect the shut-off valves to the faucet, and they crack over time. Swapping them out adds roughly $25 to $50. The parts are cheap and the fix takes just a few minutes, so most handymen will knock it out while they are already under the sink.

How to Get an Accurate Estimate Before You Hire

Describe your project clearly. Tell the handyman what type of faucet you have: single-handle, double-handle, pull-down, or touchless. Common brands like Moen and Delta are familiar to most pros, so naming yours helps. Also mention how old your plumbing is. Older pipes and valves take more time and patience to work around.

A good handyman will also peek under the sink before locking in a final price. Ask for a written estimate that separates labor from parts. That one habit protects you from vague charges after the job is done. A straight-shooting pro flags corroded valves or deteriorated lines before starting, not after.

DIY vs. Hiring a Handyman: Is It Worth the Cost?

Faucet replacement is one of the more DIY-friendly plumbing jobs. If you own basic tools and feel comfortable under a sink, you can swap a faucet in about two hours. Brand instruction manuals are clear, and video walkthroughs help a lot. That said, corroded valves or a frozen supply line can turn a 90-minute project into a full afternoon of frustration fast.

Hiring a handyman removes that uncertainty. A pro spots problems early, before they get expensive. They also show up with the right tools already in the truck, things like basin wrenches and plumber's tape that most homeowners do not keep on hand. For the majority of people, spending $85 to $175 on labor is simply the smarter call.

The Bottom Line

Faucet replacement labor runs $75 to $175 for most homes in 2026. Kitchen faucets run a bit higher at $100 to $200. Budget an extra $50 to $100 for bad shut-off valves and $25 to $50 for new supply lines if yours are worn. For your exact number, get an instant estimate from The Toolbox Pro and describe your project online for a fast price.